玩具行業涉及很多點膠領域，如電路板，玩具框架封裝，夜光粉環氧樹脂等等。這些都需要使用點膠，使用自動點膠機加工在玩具行業是非常有前景的。國內玩具制造已經大批量在國外銷售，使用傳統工藝已經很難達到玩具點膠的要求。

The toy industry involves many dispensing areas, such as circuit boards, toy frame packaging, noctilucent powder epoxy resin and so on. All these require dispensing, and the use of automatic dispensing machine is very promising in the toy industry. Domestic toy manufacturing has been sold in large quantities abroad, and it is difficult to meet the requirements of toy dispensing with traditional technology.

玩具點膠

點膠的不同位置，使用的膠水有差異，用于玩具點膠和封裝的膠水是不同的。但是自動點膠機中可以使用不同種類的膠水。例如玩具分配所需的快干膠水；電路板插頭需要使用硅膠； LED燈使用夜光膠，不同位置需要不同的膠水，那么使用點膠閥會有所不同，使用點膠技術也不同，電路板插件和熒光膠噴涂技術都可以使用。

The glue used for dispensing is different in different positions. The glue used for toys dispensing and encapsulation is different. However, different types of glue can be used in the automatic dispenser. For example, the fast drying glue needed for distribution of toys; circuit board plugs need to use silica gel; LED lamps use noctiluct glue, different positions need different glue, then the use of the glue valve will be different, the use of glue technology is different, circuit board plug-ins and fluorescent glue spraying technology can be used.

點膠機又被稱為打膠機、灌膠機、滴膠機，由此可以看出使用夜光粉配膠水并使用點膠設備來控制流體。為什么使用這種生產方法來進行玩具的點膠？現代的玩具科技含量越來越高，使用原始的人工打膠不能滿足生產要求，主要是速度比較差，企業招聘難度大，目前國產的點膠設備性價比高，所以選擇這些設備進行生產。

Dispenser is also known as glue dispenser, glue dispenser and glue dispenser. It can be seen that the noctilucent powder and glue are used and the dispensing equipment is used to control the fluid. Why is this method of production used for dispensing toys? Modern toy science and technology content is more and more high, the use of the original artificial glue can not meet the production requirements, mainly the speed is poor, the enterprise recruitment is difficult, the current domestic glue equipment is cost-effective, so the selection of these equipment for production.

自動點膠技術減少了人工點膠問題，自動點膠機的操作相對簡單，點膠速度快，精度高，而且由于采用高精度智能化控制，包裝過程中不會出現膠滴，膠漏等問題，在高精度工業中的基本點膠中沒有問題。當然，不是玩具每個位置都需要點膠技術，只有電路板、芯片、密封灌膠時才被使用。

Automatic glue technology reduces the problem of manual glue, the operation of the automatic glue dispenser is relatively simple, the speed of glue is fast and the precision is high. And because of the high precision and intelligent control, there will be no glue drop and glue leakage in the packing process, and there is no problem in the basic dispensing in the high precision industry. Of course, it is not a toy that needs dispensing technology in every location. It is used only when circuit boards, chips and sealing glue are used.

玩具的點膠不再是傳統的手工點膠過程。目前，該行業基本采用自動化生產線模式。這需要使用自動點膠設備和控制設備，人工使用和生產效率上都會大打折扣。

The dispensing of toys is no longer the traditional manual dispensing process. At present, the industry basically adopts the automatic production line mode. This requires the use of automatic dispensing equipment and control equipment, and the efficiency of manual use and production will be greatly reduced.

東莞市雅弘自動化設備有限公司是一家專注于平臺點膠機,落地式點膠機，視覺點膠機，非標自動化設備的研發生產和銷售于一體的國家高新技術點膠機廠家。

本文關鍵字：自動點膠機